ProCurve / ProVision-Based
cancel
Showing results for 
Search instead for 
Did you mean: 

Threshold setting in HP Procurve Switches

Omarrsd
Advisor

Threshold setting in HP Procurve Switches

Dear all 

 

Would request to know , how can we set the threshold setting in ethernet port of HP procurve Switches.  by default is it 30 % ?

 

2 REPLIES
TerjeAFK
Respected Contributor

Re: Threshold setting in HP Procurve Switches

Not sure what the default value is.

Setting broadcast limit in older software versions:

interface all

broadcast-limit 20

 

In newer versions:

 

interface all

rate-limit bcast in percent 20

 

Omarrsd
Advisor

Re: Threshold setting in HP Procurve Switches

What could be a cause of Packet Drop, This is the certian digits and never exceed from this ,  I have already changed Cable from that port which is connected to Cache Box. 

 

1.jpg