HPE Community
Aruba & ProVision-based
1753797 Members
7247 Online
108805 Solutions
New Discussion

Re: Uplink between gigabit ports in HP Switches

 
ramjimh
Advisor

‎03-12-2017 07:21 AM

‎03-12-2017 07:21 AM

Uplink between gigabit ports in HP Switches

Dear Team,

   Uplink between gigabit switches (Hp Procurve 3500yl-48Gpoe+ and Aruba 2920-24G Poe+ is not working. The Distance between the switches are nearly 25 metres. Is there any distance requirment for these switches.

 

0 Kudos
1 REPLY 1
HP-Browniee
Respected Contributor

‎03-13-2017 02:53 AM

‎03-13-2017 02:53 AM

Re: Uplink between gigabit ports in HP Switches

Hi

No there is not a distance requirement for these switches. It's the same as all switches connected with copper cabels. (Max 100 meters).

Make sure your ports aren't in shutdown or your SFP's are compatibel with the switches.

If that is ok, try to connect the swithces directly to each other. If the ports come up, you know the problem is with your cabling.

 

Kind regards

0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.