ProCurve / ProVision-Based
cancel
Showing results for 
Search instead for 
Did you mean: 

VLAN interfaces are missing from the routing table

SOLVED
Go to solution
Zakinov
Visitor

VLAN interfaces are missing from the routing table

Hello experts,

I am having a strange issue on my HP L3 Switch "HP Switch 5406zl".

I created some vlans  and assigned IPs to those vlan interface's, the problem is that the vlan interface's are missing from the routing table. Please advice.

3 REPLIES
Linkk
Frequent Advisor

Re: VLAN interfaces are missing from the routing table

So when you enter "sh ip" you get more IP addresses than with "sh ip route"? 

That is indeed strange. Does no new IP address appear in the routing table or is this problem only happening to "old" addresses?

DarrenD
Occasional Contributor
Solution

Re: VLAN interfaces are missing from the routing table

Are there any devices connected to the ports you've assigned to these VLANs? If not, that VLAN won't appear in the routing table

Zakinov
Visitor

Re: VLAN interfaces are missing from the routing table

Hello,

I am sorry i was OOF.

 

I resolved the issue after pluging a switch to the port tagged with  VLANS and the routes appears.

 

Thank you all.