Vrrp Owner command not functioning in HP 5412R

[SantoshN]

Hi,

We are unable to make Vrrp mode owner and command is not taking ..Can any one guide me is there any other command in HP 5412R

HP-Switch1-5412Rzl2# show vrrp vlan 32 vrid 32 config

 VRRP Virtual Router Configuration Information

  VLAN ID : 32

  Virtual Router ID : 32

  Administrative Status [Disabled] : Enabled

  Mode [Uninitialized] : Backup

  Priority [100] : 254

  Advertisement Interval [1] : 1

  Preempt Mode [True] : True

  Preempt Delay Time [0] : 0

  Respond To Virtual IP Ping Requests [Yes] : Yes

  Version [2] : 2

  Null authentication compatibility [False] : False

  Primary IP Address : Lowest

HP-Switch1-5412Rzl2(vlan-32-vrid-32)#  owner

Invalid input: owner

HP-Switch1-5412Rzl2(vlan-32-vrid-32)#

[SantoshN]

Even after reconfiguring the vrrp in 5412r switch in both switch 1 & switch 2 i am facing the same issue.

In both the switch the vrrp mode is showing backup and there is no command to make switch1 vrrp owner.

[Vince-Whirlwind]

You have too many VRIDs.

My approach would be to have one VRID per (potential or actual) STP topology.
And/or one VRID per security Zone.