Aruba & ProVision-based
1748151 Members
3858 Online
108758 Solutions
New Discussion

Re: What causes ports to be disabled?

 
lift5tyl3
Occasional Visitor

What causes ports to be disabled?

HP 2530-24g-poe + port is disabled. I want to know when the switch will disable the port.

1 REPLY 1
TerjeAFK
Respected Contributor

Re: What causes ports to be disabled?

Could be Spanning Tree or loop protection. Try the following commands:

"show spanning-tree"    Check if State is blocked for any ports
"show loop-protect"      Check if Loop Detected is Yes for any ports