ProCurve / ProVision-Based
cancel
Showing results for 
Search instead for 
Did you mean: 

configuration of port port(T) and port (S) as both the have the same port number

Bijukiv
Advisor

configuration of port port(T) and port (S) as both the have the same port number

I have a query for configuration of 10/100/1000-t (T) and SFP (s) port for the switch HP 2920 48G-poe

As the both the ports have the same port number. 

 

 

TO make port 48r has management port what is the command ?

How to make port 47s and 48s as trunk ?

regards

Biju

 

1 REPLY
parnassus
Honored Contributor

Re: configuration of port port(T) and port (S) as both the have the same port number

Those ports are Dual Personality ports: you can use just one of them at time...if you use a {45,46,47,48}T (copper) port then you can't use concurrently also the same {45,46,47,48}S (SFP) port and vice-versa. This is the meaning of Dual Personality (T/S), one or the other.

Once you are aware of that characteristic you can decide to configure a LAG (Link Aggregation Group) made of two member ports (as example: 47S+48S equipped with SFP Modules or 47T+48T) and use that newly created trunk - configured as static or LACP, it's up to you and your requirments - to uplink your Switch to another manageable Switch (or to a Server with NICs teamed/bonded).