ProCurve / ProVision-Based
cancel
Showing results for 
Search instead for 
Did you mean: 

port mirroring on stack

maro584
Occasional Visitor

port mirroring on stack

Hello everyone,

I have two hp 3800 switches working on stack and I want to made a port mirroring which will copy a traffic from few ports on both switches and send throungt one port to some kind of network analyzer. Is this configuration is possible for switches working on stack.

 

1 REPLY
parnassus
Honored Contributor

Re: port mirroring on stack

Yes, it is. (Backplane) Stacking, as deployed on HP/Aruba 3800 Switch series, should not interfere - a part from considering physical interface naming convention (stack member ID/port number, as example: 3/10 instead of only 10 when you designate port 10 of the 3rd stack member) - with port mirroring capabilities.

Please refer to HPE ArubaOS-Switch Management and Configuration Guide for KA/KB.16.xx (where xx would be 03, 04 or 05) and use latest firmware if possible.