ProCurve / ProVision-Based
cancel
Showing results for 
Search instead for 
Did you mean: 

snmp: timeout while reading LLDP-mib

Frank Grote
Occasional Contributor

snmp: timeout while reading LLDP-mib

Hi,

I got a strange behaviour with getting snmp data. When I do a snmpwalk on OID 1.0.8802.1.1.2.1.4.2.1.5, which is "lldpRemManAddrOID" I get a "Timeout: no response from xx.xx.xx.xx".

 

When I log on to the same switch and do a walkmib 1.0.8802.1.1.2.1.4.2.1.5 I get a response:

SWT-H3-1(config)# walkMIB 1.0.8802.1.1.2.1.4.2.1.5
lldpRemManAddrOID.0.1.1.1.4.192.168.0.1 = zeroDotZero
lldpRemManAddrOID.0.2.1.1.4.192.168.99.61 = zeroDotZero
lldpRemManAddrOID.0.32.1.1.4.192.168.99.60 = zeroDotZero
lldpRemManAddrOID.0.37.1.1.4.172.23.74.91 = 43.6.1.4.1.129.192.110
lldpRemManAddrOID.0.40.1.1.4.172.23.74.90 = 43.6.1.4.1.129.192.110
SWT-H3-1(config)#

 

This happens on a Procurve 2626. On an identical 2626, same Softwareversion I get not timeout. The same happens on two identical 5304xl. One works, the other not...

 

Has anybody an idea?

Thanks,

Frank