ProCurve / ProVision-Based
cancel
Showing results for 
Search instead for 
Did you mean: 

storm control in 2930F

carloshp
Occasional Contributor

storm control in 2930F

hi all,

I,m trying to search in the manuals Storm control for unknown unicast/Multicast traffic.

 i only find fault-filter for broadcast traffic but i cant configure it for unknow unicast/multicast traffic.

Rate-limit command it,s not the  appropriate because Dropps all traffic known/Unknown.

 

Could you tell me wich is the best manner to configure tis feature.

 

Thanks in advance.

 

2 REPLIES
GuruP
Valued Contributor

Re: storm control in 2930F

ACLs can filter traffic to or from a host, group of hosts or entire subnet. Here is the link to ACL document which might be helpful:  http://h20564.www2.hpe.com/hpsc/doc/public/display?docId=c05161692

 

 

Michael Patmon
Trusted Contributor

Re: storm control in 2930F

Unknown unicast DA rate limiting is not supported on 2930 (or 2920 or 3810), unfortunately.  I did forward your post to the product line manager to be considered for a future release.