ProLiant Deployment and Provisioning
cancel
Showing results for 
Search instead for 
Did you mean: 

Image Issue

 
R K Gaur
Contributor

Image Issue

Hi Team,

My name is Rakes Kumar, One of my Custmer have one HP BL c7000 Enclosure with 16 BL465c G1 server (12 Server with SUSE Linux Ver.10 With SP1 x86 and 4 Server with Win2k3).

Onboard Administrator Firmware Ver. 2.25

We have one ICE management system for image.
ICE Ver. 2.30
RDP Ver. 6.0

Issue:- When i try to create image of a linux server, image will be captured but when server up after re-boot it's host name & ip address conf. has changed, we need to change it manuly.

Note:- I am not facing this issue with Windows server.

Kindly suggest me what i should do to resolve the issue.


warm regards
rakesh kumar
m- 09958691040
2 REPLIES 2
Steven E. Protter
Exalted Contributor

Re: Image Issue

Shalom,

Question:

What kind of image?

How is it produced?

What software is used to produce it?

Any error messages as you create it?

What method are you using to restore the image?

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
R K Gaur
Contributor

Re: Image Issue

Shalom,

Question:-Is Host File configration has change after image creatied.

What kind of image?- A server (BL465c G1)
that have SUSE Linux Ver. 10 with SP1 installed and have a lot of data.

How is it produced?
Right click on server
go to New job wizard
select create image option
speacifie the location for image
(c:/programs/hp/rdp/deploy server/image/lib)
select option run this job right now
cleck next
after that server is re-boot with pxe server and image is started to caeate.
after comleation of capture image server re-boot.
but at this time it host name & ip add configration has been changed and we are not able to ping this server by host name & ip address. Note teaming is configred.

To solve the issue we need to make change in
host conf. file.

What software is used to produce it?
ICM Ver. 2.30
RDP Ver. 6.0


Any error messages as you create it?
During image capturing i am not gatting any error.


What method are you using to restore the image?

Right now i am not restore the image, i am only creating image.

SEP