RDP 3.81 (WinPE 1.6) Proliant G6 DHCP retry

[SysAdminGuy]

Hi guys,

I'm running RDP 3.81 which uses WinPE 1.6 and have a brand new Proliant DL380 G6. The G6 uses HP NC382i PCIe DP Multifunction 1GB adapters. I have added the latest HP driver based on cp010384.exe (25th March 2009) which includes NDIS 5.2 driver v4.8.5.0.

My WinPE image loads fine but I get the dhcp retry line 20 times then the aclient doesn't connect to RDP.

Other servers, including G5's work fine.

I know this is a typical symptom of the correct driver missing from the WinPE image but I'm sure it does exist, as it is listed in the driver list.

I've set my WinPE image for thorough device detection which hasn't help.

Any help is appeciated.

[BVxx001]

I have the same issue. I also notice that an error is generated when I try to import the bxnd.inf driver (it reports that bxnd50x.sys is missing).

[Cederberg]

To Deploy G6 servers you need to have rdp 3.83

[BVxx001]

If you don't use RDP or if you just want to include the drivers in WinPE, you have to use the 'HP NC-Series Multifunction Drivers for RIS/WinPE' for these NICs instead of the latest drivers in CP010384. These drivers are included in HP package SP43478.EXE

[mrty]

SP43478.EXE seems to only include drivers for WIn2003 x86/32-bit and x64. Does anyone have the URL or the name of the package to download and extract for WinPE2?