HPE Community
ProLiant Deployment and Provisioning
1752845 Members
3631 Online
108789 Solutions
New Discussion

WinPE boot fails on Blade with >16GB Ram

 
Simon Eng (Penta)
New Member

‎08-24-2009 06:14 AM

‎08-24-2009 06:14 AM

WinPE boot fails on Blade with >16GB Ram

Has anyone else experienced this? RDP 6.9SP1 with PIM 3.82. Trying to deploy BL465c blades but the blade locks after loading WinPE 1.6 or WinPE 2.1 if it has >16GB RAM. Works fine with the Linux image.

Any ideas or is this a known issue?

It's a bugger because we depend on CTO and remote deployment. The workaround has been to deploy with 4GB RAM and then send a tech around to put in 32GB.

Thanks in advance...
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.