ProLiant Deployment and Provisioning
1748079 Members
5335 Online
108758 Solutions
New Discussion юеВ

Re: using cpqacuxe under WinPE

 
Dana Hallenbeck
Occasional Contributor

using cpqacuxe under WinPE

I would like to use cpqacuxe in it's graphical form under WinPE. I have tried copying registry settings, services, and many other iterations of files and registry settings...no luck.

It this possible?

Thanks.

Dana Hallenbeck
2 REPLIES 2
Rich_97
New Member

Re: using cpqacuxe under WinPE

Use the newest version of cpqacuxe, not the 1 from the toolkit.


Make sure you choose the correct settings in the ini file for configure/auto.
I run OS off 5i so I use this to kill
Action= ReConfigure
Method= Custom
; Controller Specifications
; Controller HP Smart Array 5i
Controller= Slot 0
ClearConfigurationWithDataLoss=Yes
ReadCache= 100
WriteCache= 0
RebuildPriority= Low
ExpandPriority= Low
SurfaceScanDelay= 15

Then I use this to config:
Action= ReConfigure
Method= Custom

; Controller Specifications
; Controller HP Smart Array 5i
Controller= Slot 0
ClearConfigurationWithDataLoss=Yes
ReadCache= 100
WriteCache= 0
RebuildPriority= Low
ExpandPriority= Low
SurfaceScanDelay= 15

; Array Specifications
Array= A
; Array Drive Type is Parallel SCSI
; 2:0 (18.2 GB),2:1 (18.2 GB)
Drive= 2:0,2:1
OnlineSpare= No

; Logical Drive Specifications
LogicalDrive= 1
RAID= 1
Size= Max
Sectors= 32
StripeSize= 128
ArrayAccelerator= Enabled

Dana Hallenbeck
Occasional Contributor

Re: using cpqacuxe under WinPE

Is it possible to use the GUI though? If not, I can use the information you provided to try and integrate this into our build.

Thanks.

Dana