ProLiant Servers (ML,DL,SL)
1745832 Members
4396 Online
108723 Solutions
New Discussion

0% utilization, not all threads being used

 
matthewsnell
Collector

0% utilization, not all threads being used

We have a hp ProLiant DL360 G7 server with dual E5649 cpus. We noticed that only 9 of the threads are being used. Even when stress testing with prime95 only 9 of the threads on node 2 reach 60%. The rest are at 0%. See screenshot below. Any help would be much apprecieated. resting load.PNG

Thanks 

Matt

1 REPLY 1
Paul_J_K
HPE Pro

Re: 0% utilization, not all threads being used

Hello Matt,

On your DL360 G7, I firstly suggest to ensure the following. 

> Supported OS installed. Refer HPE OS support matrix 

> Latest available post production SPP installed online (drivers, utilities and firmware).

> BIOS configurations to be checked if there is any power saving features enabled.

> To check hardware functionality, you may try alternate OS versions to check if this is OS dependant.

I am an HPE employee
Accept or Kudo