1611 - i/o fan failure detected in compaq proliant 1600

[pearl_1]

i have this error when booting the server. i have already replaced the fan but still have the error massage.

please anyone, how to solve this

[SIVAKUMAR.P]

Hi pearl,

This is problem found in the I/O Channel Colling fan, if you shutdown the server and removed the colling fan, clean the dust and refixed again. Once again switched on the server.if it is not rotating the colling fan, Could u contact local vendor and replaced the part.

Thanks and Regards

Shiv.P

[pearl_1]

thanks,

i have already replaced the fan and now the fan is working fine.

the problem is i still received the same error massage



-pearl-

[Tv_3]

Hi, is the fan spinning up, is he working, if he is then do try the following.

Enter the System Configuration Utility (SCU) I believe F10.

If you have not installed an F10 partition you will need to boot from a Smartstart CD and run the System Configuration from Smartstart.

Normaly a warning screen wil ask you to fixed the problem. Click yes or OK.

[pearl_1]

hi,

the fan is spinning, ok i will try the F10 thing first :-)



thanks

[Vijay_44]

Pearl,
It is possible that it is repeating its "old" error, which may still be there in the error log (NVRAM). When you are in the F10 - clear your NVRAM.

[SIVAKUMAR.P]

Hi pearl ,

Once again could you try to update the Server BIOS/FIRMWARE, It should be resolved your issues.

here i mention the ulr path of BIOS/FIRMWARE:
http://h18023.www1.hp.com/support/files/server/us/locate/20_1126.html#62

Thanks&Regards
ShivP