ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

1611 - i/o fan failure detected in compaq proliant 1600

pearl_1
Occasional Visitor

1611 - i/o fan failure detected in compaq proliant 1600

i have this error when booting the server. i have already replaced the fan but still have the error massage.

please anyone, how to solve this
6 REPLIES
SIVAKUMAR.P
Frequent Advisor

Re: 1611 - i/o fan failure detected in compaq proliant 1600

Hi pearl,

This is problem found in the I/O Channel Colling fan, if you shutdown the server and removed the colling fan, clean the dust and refixed again. Once again switched on the server.if it is not rotating the colling fan, Could u contact local vendor and replaced the part.

Thanks and Regards

Shiv.P
24/7 SUPPORT Mobile.No:919841509428
pearl_1
Occasional Visitor

Re: 1611 - i/o fan failure detected in compaq proliant 1600

thanks,

i have already replaced the fan and now the fan is working fine.

the problem is i still received the same error massage



-pearl-
Tv_3
Respected Contributor

Re: 1611 - i/o fan failure detected in compaq proliant 1600

Hi, is the fan spinning up, is he working, if he is then do try the following.

Enter the System Configuration Utility (SCU) I believe F10.

If you have not installed an F10 partition you will need to boot from a Smartstart CD and run the System Configuration from Smartstart.

Normaly a warning screen wil ask you to fixed the problem. Click yes or OK.

Chaos, Panic or Disaster??? Always Stay Calm, I will fix it.
pearl_1
Occasional Visitor

Re: 1611 - i/o fan failure detected in compaq proliant 1600

hi,

the fan is spinning, ok i will try the F10 thing first :-)



thanks
Vijay_44
Honored Contributor

Re: 1611 - i/o fan failure detected in compaq proliant 1600

Pearl,
It is possible that it is repeating its "old" error, which may still be there in the error log (NVRAM). When you are in the F10 - clear your NVRAM.
There’s your problem!!! This thing is set to EVIL!
SIVAKUMAR.P
Frequent Advisor

Re: 1611 - i/o fan failure detected in compaq proliant 1600

Hi pearl ,

Once again could you try to update the Server BIOS/FIRMWARE, It should be resolved your issues.

here i mention the ulr path of BIOS/FIRMWARE:
http://h18023.www1.hp.com/support/files/server/us/locate/20_1126.html#62

Thanks&Regards
ShivP
24/7 SUPPORT Mobile.No:919841509428