HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

1716 error on HP DL 380 G5 after replacing failed SAS 72GB drive in array

 
bjhowd100
Occasional Contributor

1716 error on HP DL 380 G5 after replacing failed SAS 72GB drive in array

I noticed today after replacing a failed drive under Carepaq a 1716 error- Slot 1 Drive array - Unrecoverable media error detection on drives during previous rebuild or background surface analysis(ARM) scan. Error will be fixed automatically when the sectors are overwritten. (Backup and restore recommended).

 

I flashed everything I could possibly flash on this server to the latest firmware, but still seeing this on reboot. The drives all seem to be ok in HP Insight diagnostics. Do I need to worry about this error?. Is this correctable. I don't want to have to reconfigure the drive array, and then restore from backup if I don't need to at this point.  Server boots up and comes online with no issues other than this message at POST.  Anyone know what the next thing to do at this point? Thanks. It's part of a Windows Cluster for MS Exchange servers.

1 REPLY
Johan Guldmyr
Honored Contributor

Re: 1716 error on HP DL 380 G5 after replacing failed SAS 72GB drive in array

Run a file system check to verify the integrity of the file system and the files within it, there may just be some files that are corrupted.