HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

1720-Slot 0 Drive Array - S.M.A.R.T. Hard Drive(s) Detect Imminent Failure

 
JEMSHY
Occasional Advisor

1720-Slot 0 Drive Array - S.M.A.R.T. Hard Drive(s) Detect Imminent Failure

HP ML350.jpg

HP PROLIANT ML350 G5 - WINDOWS 2003 R2

When I was using 2 hard disk (Raid 1+0) ,it was showing 1720-Slot 0 Drive Array - S.M.A.R.T. Hard Drive(s) Detect Imminent Failure (Box1: Bay 2) and Green light on Amber light blinking. I just removed HDD from Bay 1 and keep HDD in Bay 2 only (which was blinking Amber light) so it works properly , no message came , not blinking Amber light its perfect , when I returned the HDD in bay 1 Amber blinking again ... its just brand new HDD. Any solution ???

I have updated firmware -Storage Controller

Thanks

1 REPLY
Jimmy Vance
HPE Pro

Re: 1720-Slot 0 Drive Array - S.M.A.R.T. Hard Drive(s) Detect Imminent Failure

time to replace a disk before it fails. depending on how you have disks configured could be as easy as swapping out the disk, or  backup and start over from scratch




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!