ProLiant Servers (ML,DL,SL)
Showing results for 
Search instead for 
Did you mean: 

'177 Configuration not complete' after power outage

Tim Fawcett
Occasional Contributor

'177 Configuration not complete' after power outage

Hi - got a DL360 (1st generation) running W2K SP4. Had to shut it down for a power outage, when starting up I now get a '177-Configuration not complete' message followed by 'Controller order not setup'. An additional complication is that one of the (mirrored) disks had failed before the outage, the person carrying out the shutdown / restart popped the failed disk out when starting up, so we now get the usual 'SCSI port 2 missing' message, and press F2 to 'fail' the missing disk.

I'm assuming (hoping) the data on the remaining disk is OK, is there a quick way to restore this server (quicker than rebuilding it anyway)?