ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

1777 post error on dl360 G1

Antonio_73
Advisor

1777 post error on dl360 G1

I'm trying to fix this problem:
DL360 G1, with Smart Array Controller (ver 1.50) and the following error:
1777-Slot 0 Drive Array - Proliant Storage Enclosure Problem detected
SCSI Port 2: Interrupt Signal Inoperative - Check SCSI Cables
This error comes out only when the frontal scsi cage is mounted.
I've tried three different scsi cages, all with the same result.
What else to do?
4 REPLIES
Prashant (I am Back)
Honored Contributor

Re: 1777 post error on dl360 G1

Hi,

try to clear the NVRAM
then check again.
any error led on the board check image attached

Check with cable and and no hdd attached on the server any error mesasage on screen
Nothing is impossible
Antonio_73
Advisor

Re: 1777 post error on dl360 G1

Hi,

thanks for answering.

Motherboard is 173837-001, cpu 2x 933Mhz
Firmware P21 11/15/2002

After clearing and recycling power, LED are these:

LED 1 Green
LED 2 Off
LED 2A Off
LED 3 Off
LED 3A Green
LED 4 Off

Thanks,
Brian Simon
Occasional Visitor

Re: 1777 post error on dl360 G1

I am having this same problem with a DL380 G3 and a new MSA30 DB storage works. I am very interested to see what you do to resolve this. I will also let you know if I figure out the problem.

-Brian
Antonio_73
Advisor

Re: 1777 post error on dl360 G1

Hi Brian,

I've solved it my way.

As the system is working very well, despite the alert, I've set DL360 to not STOP (F1 prompt) in case of error.

I'ld prefer to see no error, but lacking any information on how to do that, simply avoiding F1 solves my situation.

Ciao,

Tonino