HPE Community
ProLiant Servers (ML,DL,SL)
1753254 Members
4574 Online
108792 Solutions
New Discussion юеВ

1777 slot 3 drive array proliant enclousre problem detected

 
SOLVED
Go to solution
KisShore
Advisor

тАО10-26-2005 05:09 AM

тАО10-26-2005 05:09 AM

1777 slot 3 drive array proliant enclousre problem detected

i have got the above error while post screen.
i had try clear the nvram but still abvoe the erro is presists.Please help Me..
Server confuguration is Proliant ML 350 g4
system bios is :12-20-2005
Smart array controller is:642(64 mb 2.34 version)
0 Kudos
3 REPLIES 3
Terry Hutchings
Honored Contributor

тАО10-26-2005 05:43 AM

тАО10-26-2005 05:43 AM

Solution

Re: 1777 slot 3 drive array proliant enclousre problem detected

Is there any additional text associated with it? Like "wide scsi tranfer failed"?

If this is the error, then I would recommend checking the cable (about 1 inch long cable) joining to two sides of the backplane together. Usually this is solved by just reseating both ends of it.
The truth is out there, but I forgot the URL..
0 Kudos
KisShore
Advisor

тАО10-26-2005 07:00 AM

тАО10-26-2005 07:00 AM

Re: 1777 slot 3 drive array proliant enclousre problem detected

yes as u said right
2nd error is
SCSI port2 wide scsi transfer failed check scsi cable.
0 Kudos
KisShore
Advisor

тАО10-28-2005 03:23 AM

тАО10-28-2005 03:23 AM

Re: 1777 slot 3 drive array proliant enclousre problem detected

yes absloutely problem is solved after refixing ( 1 Inch cable back side of scsi plane) Thanks a lot to TERRY HUTCHINGS :)
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.