ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

1783 - Slot 0 Array controller is in a lock up State

karrar1065
Occasional Visitor

1783 - Slot 0 Array controller is in a lock up State

Following is the screen shot of the error when server starts. 

 

2 REPLIES
Torsten.
Acclaimed Contributor

Re: 1783 - Slot 0 Array controller is in a lock up State

Looks like an old system ...

Consider to remove the cable to the disks and check if the error remains.

Disconnect the cache module, if possible and present.

If the issue remains, the controller is likely defective. Depending on the hardware it is integrated into the system board or a single module.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
PZel
Valued Contributor

Re: 1783 - Slot 0 Array controller is in a lock up State

Probably its the BBWC. Replace it by a new 413486-001 (128MB cache module) for the DL380G4

PZ