ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

1786 Drive Array automatic recovery Needed

 
becky77
Occasional Visitor

1786 Drive Array automatic recovery Needed

Hello,

We lost a drive on our ML350 server and a new 36 gig drive was put in on Friday. 3 days later we are still seeing 1786 Drive Array automatic recovery Needed

Launching Array diagnostic utility displays the following but there doesn't seem to be a way to force a recovery here.
Logical drive 1 status = Ready for recovery

HP Array utility displays Waiting for Rebuild however you can't see the physical grouping of drives. They all display in a single raid 5 configuration.

Server is not under Warranty and sort of at a loss to get this thing backup. thanks

2 REPLIES
KarloChacon
Honored Contributor

Re: 1786 Drive Array automatic recovery Needed

hi

ml350 generation? g1? g2? ...?

would you mind uploading an array diagnostic utility report here?

regards
Didn't your momma teach you to say thanks!
becky77
Occasional Visitor

Re: 1786 Drive Array automatic recovery Needed

ok put in a new 36.4 drive, updated the firmware and rebooted the server and the attached is the information from the Array diagnostics - all 6 drives are configured as one array but 2 of the drives are 10 K and the other 3 are 15 K. Is this a problem? Shouldn't all drives be the same speed? Also the event logs list this as an event - my concern is that even after waiting a day or so we will still see this in the event logs Someone replaced the drive already and we appear to be waiting and waiting which is why I decided to update the server today with a new drive. The drives are only 36 gig. - thanks

Event Type: Warning
Event Source: Storage Agents
Event Category: Events
Event ID: 1200
Date: 9/9/2008
Time: 12:17:22 PM
User: N/A
Computer: servername
Description:
Drive Array Logical Drive Status Change. Logical drive number 1 on the array controller in Slot 3 has a new status of 6.
(Logical Drive status values: 1=other, 2=ok, 3=failed, 4=unconfigured, 5=recovering, 6=readyForRebuild, 7=rebuilding, 8=wrongDrive, 9=badConnect, 10=overheating, 11=shutdown, 12=expanding, 13=notAvailable, 14=queuedForExpansion)
[SNMP TRAP: 3034 in CPQIDA.MIB]
Data:
0000: 1a 00 06 03 00 01 05 06 ........
0008: 0f 00 00 00 00 00 00 00 ........
0010: 03 00 00 00 00 00 00 00 ........
0018: 00 00 00 00 00 00 00 00 ........