ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

1794- Slot 0 Drive Array Array accelator battery charge low

JEMSHY
Occasional Advisor

1794- Slot 0 Drive Array Array accelator battery charge low

 

Hi,

I have HP Proliant ML 350 G5, recently change 2 new hard disk and made Rad 1+0  , after that I am geting 2 errors, 

1-  1794- Slot 0 Drive Array Array accelator battery charge low

2- 1720 - Slot 0 Driver Array - S.M.A.R.T. Hard ,Drive detect imminent failure , 

Screen Shot Attached 

Drive error cause of Batter low ?

Kindly respond.

Many Thanks,

Jemshid 

 

7 REPLIES
Jimmy Vance
HPE Pro

Re: 1794- Slot 0 Drive Array Array accelator battery charge low

Has this server been sitting off in the corner not being used for some time?  Battery low is usually due to not having power for some extended time. Being a G5, the battery might just need to be replaced.  A bad drive generally won't cause a battery low message.




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!   
JEMSHY
Occasional Advisor

Re: 1794- Slot 0 Drive Array Array accelator battery charge low

Yes, it was off for 2 days,  and how much cost for battery? 

Both drives are new , so how come it failure? 

Thanks for ur reply

JEMSHY
Occasional Advisor

Re: 1794- Slot 0 Drive Array Array accelator battery charge low

Should I try firmware update?

Could you pls send link todownlod.

thanks

Jimmy Vance
HPE Pro

Re: 1794- Slot 0 Drive Array Array accelator battery charge low

Start at the main HPSC page an search for your server model http://h20565.www2.hpe.com/portal/site/hpsc . Drill down to the disk controller firmware

 




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!   
Jimmy Vance
HPE Pro

Re: 1794- Slot 0 Drive Array Array accelator battery charge low

if after letting the server run for a few days, if you still get teh low battery warning, you can use PartSurfer to locate the part. http://partsurfer.hpe.com/search.aspx

 




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!   
JEMSHY
Occasional Advisor

Re: 1794- Slot 0 Drive Array Array accelator battery charge low

I have updated firmware -Storage Controller , but still no change ,

when I was using 2 hard disk (Raid 1+0) ,it was showing 1720-Slot 0 Drive Array - S.M.A.R.T. Hard Drive(s) Detect Imminent Failure (Box1: Bay 2)  and Green light on Amber light blinking. I just removed HDD from Bay 1 and keep HDD in Bay 2 only (which was blinking Amber light) so it works properly , no message came , not blinking Amber light its perfect , when I returned the HDD in bay 1 Amber blinking again ... its just brand new HDD.  Any solution ??? 

Many Thanks 

 

 

JEMSHY
Occasional Advisor

Re: 1794- Slot 0 Drive Array Array accelator battery charge low

Dear Jummy Vance