ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

1850R having problems with 3200 & 5300.

 
Mike_498
Occasional Contributor

1850R having problems with 3200 & 5300.

Error: 1775 - Slot 2 Drive array- Proliant storage enclosure not responding. SCSI port 1: Check storage enclosure power switch and cable.
1785- slot 2 Drive Array not configured
no drives detected
----------------------------------
2x 3200 controllers and one 5300 controller have been tried, the PCI expansion riser and the system board have been replaced and two different SCSI cables have been tried all with the same result. When I get into the Smartstart CD, and try to configure it or look at the controller, it says there are no physical drives attached (but there are 4 drives in the system). Firmware has been upgraded, erase utility has been run several times. The onboard SCSI controller works fine when it is attached...no problems with that. I only get this problem when I try to use a controller. Any suggestions?