ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

2 error in proliant ML370 G3

leila_1
Occasional Visitor

2 error in proliant ML370 G3

i use proliant ML370 G3 . it has 3 scsi hards and windows server 2003 .in the EVENT VIEWER (system) get 2 error , i don't change on server recently but these errors get
error 1 :event id 11
the driver detected a controller error on \device\harddisk2"

error 2 : event id 7
the device, \device\harddisk2, has a bad block
harddisk2 is BOOT and windows server installed on harddisk2.
harddisk2 is BASIC and 1 PARTITION.
what is mean these errores?
how do i fix errores?
please help. very thanks
1 REPLY
Rajashekar Chintakunta
Honored Contributor

Re: 2 error in proliant ML370 G3

Hi Leila,

Has the error says there could be bad blocks on the Harddisk. I would suggest you to backup the data on the disk and run diagnostics on the disk.

To run a through test boot from the Smart start CD and goto server maintainance option and run diagnostics on the Hdd and check. It the test fails, log a call with HP and replace the harddisk.

Regards,
Raj.