20/40 gb dat

[Eugênio Carlos]

Hi,
I have a dat 20/40 gb and I d'like to install it my RedHat Advanced 3.0 and
server HP Proland DL 380.
but I don't have a correct driver and its installation manual.
Where do I find them?

Best regards,

Eugenio

[Roger Faucher · Accepted solution]

Eugenio:

Please post the exact model number of your DAT drive.

Make a great day!

Roger

[Prashant (I am Back)]

Hi,

drive is compatible to Server if you are using 5i controller.
http://www.hp.com/products1/storage/compatibility/tapebackup/ISS/index.html

Where as OS support informaiton for dat 24i is also there
http://www.hp.com/products1/storage/compatibility/tapebackup/software/index.html

In case you are facing problem with using the dat install the lTT from following wesite to validate the product.
www.hp.com/support/tapetools

Regards,
Prashant S.

[Eugênio Carlos]

Hello,
I model a dat 20/40 gb (HPC5683A),and serial number 230203-001,use SCSI tape drives with your Smart Array 5xxx controler.

Thank.

[Prashant (I am Back)]

Hi,

Drive getting detected at post.
answer should be yes.

The install l&tt for linux then daignos your device and revert back.

Regards,
Prashant S.

[Roger Faucher]

Eugenio:

Additionally, you may want to consider this firmware upgrade:

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?locBasepartNum=co-3161-2〈=English+%28US%29

Roger

[Eugênio Carlos]

Hello,
Roger Faucher,Prashant Sharma.

Thank.

[Prashant (I am Back)]

Hi

Firmware can be upated using l&TT only.
Check the attachemnt which help you to do to work with L&TT

Regards,
Prashant S.