ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

207-Invalid Memory Config Error

Ayman Altounji
Valued Contributor

207-Invalid Memory Config Error

I've ordered tons of 128MB SDRAM 133 DIMMs, and when I went to add 2 of the new DIMMS to an existing system (DL360), I received the following error: 207 - Invalid Memory Configuration. Unsupported DIMM in Socket 3. Only Registered SDRAM DIMMS are supported. The same message followed, for Socket 4.

These DIMMS are all from COMPAQ, PN: 174224-B21. I'm running BIOS revision 12/26/1999, Family 386P21, Type 03.

Has anyone seen this before?
Thanks for any assistance.
1 REPLY
Ayman Altounji
Valued Contributor

Re: 207-Invalid Memory Config Error

RC
The memory you have is for the Deskpro EN, EX, EXS series of commercial desktops
What you are looking for is 1024-MB PC133MHz Registered ECC SDRAM DIMM Memory Option Kit 128280-B21

512-MB PC133MHz Registered ECC SDRAM DIMM Memory Option Kit 128279-B21

256-MB PC133MHz Registered ECC SDRAM DIMM Memory Option Kit 128278-B21

128-MB PC133MHz Registered ECC SDRAM DIMM Memory Option Kit 128277-B21

64-MB PC133MHz Registered ECC SDRAM DIMM Memory Option Kit 128276-B21

Mark