ProLiant Servers (ML,DL,SL)

270 Error ilo communication issue HP Proliant ML110 Gen9

 
sdussan
Visitor

270 Error ilo communication issue HP Proliant ML110 Gen9

 
Hello, Can someone help me please !!!

I have a HPE proliant ML110 G9 server.

When turned on, the screen is fixed to the hpe load image after boot.

Error code 270 - iLO fw communication inssue - unable to communicate with iLO FW. Certain management functionality is not available.
3 REPLIES 3
Sebasbin
HPE Pro

Re: 270 Error ilo communication issue HP Proliant ML110 Gen9

Hi sdussan,

Please perform the below steps

1)Update the ILO firmware 

2)Update the server BIOS  and reboot the server

3)If issue persists,please power down the server and remove power supply unit and connect it back after 30-60 seconds.


Note: While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the company

Accept or Kudo

sdussan
Visitor

Re: 270 Error ilo communication issue HP Proliant ML110 Gen9

Thank you,

which are the options to perform the ILO firmware update. I have attempt to do it through the bios, but the screen is locked in the error.

Sebasbin
HPE Pro

Re: 270 Error ilo communication issue HP Proliant ML110 Gen9

Hi,

 Please refer below document to update Firmware within iLO 4 using Binary (.bin) file

https://support.hpe.com/hpesc/public/docDisplay?docId=sf000046896en_us&docLocale=en_US


Note: While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the company

Accept or Kudo