HPE Community
ProLiant Servers (ML,DL,SL)
1752577 Members
3771 Online
108788 Solutions
New Discussion

Re: 2GB memory modules in a ML350G4

 
Ditmar Stoop
Occasional Advisor

‎10-20-2005 07:12 PM

‎10-20-2005 07:12 PM

2GB memory modules in a ML350G4

According to the ML350G4 quickspecs, 2GB modules can only be placed in slots 1 and 2, when slots 3 and 4 are also populated with 2GB modules.
Does anyone know what the reason for this is or could be?
I've recently configured a ML350G4 with two 2GB modules in slots 1 and 2 and no modules in 3 and 4, and there was no indication of any problem with this configuration, after having run the Smartstart diagnostics and installing W2K, just for testing purposes.
0 Kudos
Reply
1 REPLY 1
Steven Clementi
Honored Contributor

‎10-21-2005 08:59 AM

‎10-21-2005 08:59 AM

Re: 2GB memory modules in a ML350G4

Though I supplied a comment in BSF, I will post here too...

The quickspecs probably mean that you can not have 1GB or 512MB modules in slots 1 and 2 while you have 2GB modules in 3 and 4.

Having 2GB modules in only 1 and 2 should be ok... as you see.


Steven
Steven Clementi
HP Master ASE, Storage, Servers, and Clustering
MCSE (NT 4.0, W2K, W2K3)
VCP (ESX2, Vi3, vSphere4, vSphere5, vSphere 6.x)
RHCE
NPP3 (Nutanix Platform Professional)
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.