ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

2x ProLiant DL360 G6 Debian 2.6.27 interconnect failed

 
Tim Tester
Occasional Visitor

2x ProLiant DL360 G6 Debian 2.6.27 interconnect failed

Hi,

I have 2x ProLiant DL360 G6 installed with Debian Etch and Kernel 2.6.27.15.

I now connect a patchcable between both servers on eth1 for drbd.
Both server are available over eth0.

I configure now eth1 with "192.168..." on server 1.
When I configure eth1 on server 2 and press ENTER, one of the server will not be reached anymore. Neither over eth0 nor eth1 nor iLo.
Its like the server hangs completely. Can't see anything.

Does anyoneelse experienced such a phenomenon?

I searched a lot here in the forum and on google but couldn't find any hint to such a problem.

Any help will be much appreciated!!

Thanks
Tim