ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

3.5' drive cage for ML350 Gen10

 
CARDSERVER
Occasional Collector

3.5' drive cage for ML350 Gen10

Hi Guys

We purchased a ML350 Gen10 server for our office and it came with SFF hard drive cage.  This allows us to install 8 x 2.5" drives.  We want to use 4 LFF drives.  I have spent time with HPE support and looked online but I can't seem to find the exact parts I need.  It is my understadning that I need the following:
1.  LFF Cage
2.  Backplate

3.  Cable 

4.  Drive Caddy/Trays (774026-001)

During my research I was able to find a SKU# 874566-B21 (which seems to fit what I need but I am not sure if this includes the cable.  Also, any part number for the drive trays/caddy?

Anyone has any insight into this?

HPE ProLiant ML350 Gen10 4114 2P 32GB-R P408i-a 8SFF 2x800W RPS Perf Rack Server

Base Model #877622-001 Config #f98d62de1ee14298b9ec4ea53e6e7716

 

3 REPLIES 3
ShruthiSK
HPE Pro

Re: 3.5' drive cage for ML350 Gen10

Hi, 

The parts that would need are: 

1. LFF Backplane kit does not include the cables: 874566-B21 (Pg 33)

This drive backplane can be used for both 

2. LFF SAS Cable if you have a AROC controller: 874573-B21 (Pg 35)

LFF SAS cable if you have a PCI controller: 874574-B21 (Pg 35)

Regards,

Shruthi (HPE Employee)

Accept or Kudo

CARDSERVER
Occasional Collector

Re: 3.5' drive cage for ML350 Gen10

Thank you for the above info. What about drive trays?

Thank you.
ShruthiSK
HPE Pro

Re: 3.5' drive cage for ML350 Gen10

Hi, 

No drive trays required. 

Other than the parts recommended, you will need the LFF drives as per your requirement. 

Regards,

Shruthi (HPE Employee)

Accept or Kudo