341 72 KGB 2-Port SAS Drive is predicted to fail soon.

[ZombieLad]

Hi All,

I did some searching in the forums before posting, but came up empty.

I have a DL380 G5 that recently had 6 drives all go into a "Failure Pending" status. I have swapped out drives several times, but the errors will not clear after the array finishes the rebuild.  

I have a Smart Array P400 installed with firmware version 7.22. I have a single logical drive sporting RAID 5.

Has anyone come across this issue before? If so, what was done to fix it?

[PGTRI]

hi,

Please attach an ACU report.

Thanks

regards,

[ZombieLad]

Just swapped out the hard drive back plane. Powering it up now.

[ZombieLad]

Well, that did jack squat. Back to square 1.

[PGTRI]

hi,

In my opinion - all those 6 drives are unfortunately gone. If you go to replace those drives, please make a backup,  recreate the raid and install the new drives at once. The errors will be overwrited,  If you replace the hdds one by one.

Thanks

regards,