3x1x16 ip kvm

[PDarmanin]

Hi there,



I am having some small problems with this ip kvm switch.



I have connected an 8 port expansion to one of it ports, connected servers to it and it is working fine thus it is not listed in the cascading switch. Is this normal since it is an expansion and not a switch?



Also once that a server is not any more connected to the ip kvm and has been replaced by an other server; i.e. different mac address and server name, the old server is still being listed in the list of servers. I have done a rysnc and still it gave me the old servers which are not even connected to the kvm. Is there a way to remove the old servers; i.e. clear history?



Also, does any one found the service manual of the product? I spend several hours on the net looking for it and only been able to find the installation manual. The normal path to find the drivers, firmware and manuals will lead you to a nice ending saying â there are no updates for this productâ . Hope u can help me with this.



Thanks for your help



Pierr

[Sunil Jerath · Accepted solution]

Hello Pierre,
Yes you are right that is an expansion board. Here is link for documentation/software for the KVM:

http://h18007.www1.hp.com/support/files/server/us/download/18377.html

The following link has the firmware for KVMs:

http://h18007.www1.hp.com/support/files/server/us/locOsCat/20_81.html

Regards,

[Sunil Jerath]

Hello Pierre,
Here is another link for your KVM:

http://h18000.www1.hp.com/products/quickspecs/11451_ca/11451_ca.HTML

Please email me your email address at sunil.jerath@hp.com and I shall try to email you the User Guide.

Regards,