ProLiant Servers (ML,DL,SL)
1745829 Members
4128 Online
108722 Solutions
New Discussion юеВ

4 DL370G6 and 4 DL785G6 no PXE with NC364T

 
Aissa
Frequent Advisor

4 DL370G6 and 4 DL785G6 no PXE with NC364T

4 DL370G6 and 4 DL785G6 Full Memory and CPU with 2 NC364T on all the servers.

My probleme is that i can't choose these card to boot PXE on them. They are no shown in the BIOS.

Can someone help please.
3 REPLIES 3
Aissa
Frequent Advisor

Re: 4 DL370G6 and 4 DL785G6 no PXE with NC364T

Hi,

This silent mod from HP is strange ... Why no one reply ?

These servesr are NOT cheap at all and i see all the quick spec, from HP this suppose to work !

Thx

Vamsee
New Member

Re: 4 DL370G6 and 4 DL785G6 no PXE with NC364T

You can download the following Softpack to get the tools (or search for SP43831.exe):
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=US&swItem=MTX-57588fd64ef3474a8578d91b74&prodTypeId=329290&prodSeriesId=3794183
This softpaq is the entire CD and you only need one file.
Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is a self-extracting executable with a filename based on the SoftPaq Number above.
From that drive and directory, execute the downloaded file and follow the on-screen instructions.

After the files have been unpacked, you may delete the SoftPaq file
Mount the USB key from the server you want to enable PXE on the NC364T and boot it to DOS
From the command prompt, select the directory where you copied ibautil.exe
Execute the command c:\IBAUtil -NIC=1 -FE -STE -MSE
NIC=1 selects the NIC in port 1
FE enables the flash of the boot ROM (-FD disables)
STE enables the setup menu at POST (-STD disables)
MSE enables the CTRL-s message at POST (-MSD disables)
Reboot and you should see the Intel NC364T NIC at POST with the CTRL-s option to enter setup.
Lukas_CH
Trusted Contributor

Re: 4 DL370G6 and 4 DL785G6 no PXE with NC364T

This file does not work with the nc364t, it is for nc382t.

Where can I find the firmware tool for nc364t?