HPE Community
ProLiant Servers (ML,DL,SL)
1753808 Members
8416 Online
108805 Solutions
New Discussion юеВ

Re: 532 Array controller lockup

 
Morgan_11
New Member

тАО03-23-2004 11:45 PM

тАО03-23-2004 11:45 PM

532 Array controller lockup

Hi.I have a customer who is running a Proliant ML350 G2 machine with a Smart Array 532 controller.There seems to be a problem in that when the machine is booted it gives a 17XX error stating that there is a bios/controller lock on that Array controller.After a bit of pressing he told me that they were attempting to upgrade the firmware on the controller with Smart Start 6.40 (which was unsuccessful) and after rebooting the machine the above mentioned error occured.He also said that when the machine is now booted into Smart Start, it shows that there is no mass storage (raid controller) available.Any thoughts? Thanks
0 Kudos
Reply
2 REPLIES 2
Stephen Grimmer
Trusted Contributor

тАО03-23-2004 11:55 PM

тАО03-23-2004 11:55 PM

Re: 532 Array controller lockup

You need a new 532 controller.
0 Kudos
Reply
Morgan_11
New Member

тАО03-23-2004 11:57 PM

тАО03-23-2004 11:57 PM

Re: 532 Array controller lockup

That's what I thought. I have a feeling that the user downed the machine while the firmware was upgrading.Thanks
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.