ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

5i Upgrade firmware message on boot

Ayman Altounji
Valued Contributor

5i Upgrade firmware message on boot

Hi, I hope someone can help me here. I have upgraded the firmware on the 5i controller to revision 1.80 (the latest available on the compaq web site) and the controller on boot reports this as being the firmware level.
The problem I have is that on boot up the controller still states that it needs a firmware upgrade? Any idea on this since I am already at the latest revision?

Thanks a lot
1 REPLY
Ayman Altounji
Valued Contributor

Re: 5i Upgrade firmware message on boot

I beleive what you are seeing is discussed in advisory EX020213_CW01. It is not the array controller that needs to be updated, it is the hard drives.

Jim