HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

64006 Error on ML350 G6 Server

 
goldmoon77
Occasional Contributor

64006 Error on ML350 G6 Server

I am getting the following error on an ML350 G6 server - 640006: The Read and/or Write HARD error rate is above threshold.  This error shows up on all drives that are part of a RAID 5 array.  After doing some research, I updated the controller firmware and ACU last night and waited for the scheduled reboot.  The error persists today.  I have attached the most recent ADU.  I was hoping somebody out there might have some suggestions for resolving this error?

1 REPLY
PGTRI
Honored Contributor

Re: 64006 Error on ML350 G6 Server

hi,

 

All your 500 GB drives have read and write errors.

 

[Physical Drive 1I:1:3]

Read Errors Hard

14  (0x0000000e)

Write Errors Hard

138  (0x0000008a)

 

 

[Physical Drive 1I:1:4]

Read Errors Hard

23  (0x00000017)

Write Errors Hard

574  (0x0000023e)

 

[Physical Drive 2I:1:5]

Read Errors Hard

2  (0x00000002)

Write Errors Hard

8  (0x00000008)

 

[Physical Drive 2I:1:6]

Read Errors Hard

1  (0x00000001)

Write Errors Hard

55  (0x00000037)

 

Can You please attach an ACU report and not an ADU?

 

Thanks

 

regards,

How to Say Thank You? Just click the KUDOS!