ProLiant Servers (ML,DL,SL)

Re: 6400R beeps

 
Brad Pickerill
New Member

6400R beeps

I am working on a 6400R. It will power on, but not long after, it will give me 2 long beeps. It stays on, but doesn't display any video. I have taken out and reseated the processors, terminators, VRMs, memory sticks, memory board, expansion card with video, serial, and ps2 ports, and the NIC card. I am let to think that the motherboard is the problem. Help. bradlypickerill@hotmail.com
4 REPLIES 4
Dave Bauhof
New Member

Re: 6400R beeps

The book says to flash the ROM using ROMpaq.
Mike_498
Occasional Contributor

Re: 6400R beeps

I would also try updating with the latest ROMPAQ. If that does not work, bring the server down to its bear minimum... remove any cards that are not necessary for booting, use one processor (unless they are banked) and go down to the minimum memory configuration. If it boots up, put back in one thing at a time.
Tony Karavidas
New Member

Re: 6400R beeps

I'm having the same trouble. Can someone identify the meaning of the beeps??
Tony Karavidas
New Member

Re: 6400R beeps

Well I reseated teh processors and VRMs and now it works again!!