6400R beeps

[Brad Pickerill]

I am working on a 6400R. It will power on, but not long after, it will give me 2 long beeps. It stays on, but doesn't display any video. I have taken out and reseated the processors, terminators, VRMs, memory sticks, memory board, expansion card with video, serial, and ps2 ports, and the NIC card. I am let to think that the motherboard is the problem. Help. bradlypickerill@hotmail.com

[Dave Bauhof]

The book says to flash the ROM using ROMpaq.

[Mike_498]

I would also try updating with the latest ROMPAQ. If that does not work, bring the server down to its bear minimum... remove any cards that are not necessary for booting, use one processor (unless they are banked) and go down to the minimum memory configuration. If it boots up, put back in one thing at a time.

[Tony Karavidas]

I'm having the same trouble. Can someone identify the meaning of the beeps??

[Tony Karavidas]

Well I reseated teh processors and VRMs and now it works again!!