6G Disk detected as 3G by P410i controller

[mbocos]

Any other Idea?

[cnb]

Can you post the full ADU report here?

Rgds,

[cnb]

Also can you post the complete drive model and part numbers on ALL the labels from all of your disks?
Model:
Part/Assembly Number:
Option Number:
Spare Number:


Something isn't making sense based upon the Model number and part numbers you posted. There was one hit on the web for one of your drives and it isn't indicating 6G:

Description


Model Number(s): EG0146FAWHU
Part/Assembly Number(s): 507129-002
Option/Retail Part Number: 431958-B21
Spare Number(s): 432320-001
Specification



HP 146GB 3G SAS 10K SFF

DP ENT HDD
146GB 3G 10K
Capacity
146,815,737,856

Height
0.63 in (16.0 mm)


Width
3.1 in (78.7 mm)


Depth
5.45 in (138.4 mm)

Interface
SAS


Transfer Rate Synchronous (Maximum)
3 Gb/sec

[mbocos]

Thanks for your replies, I attached full ADU report.

[cnb]

We can't open the file.

Please rename the file extension .Zip or .ZIP (not .zip). For some reason this forum has problems opening files with lower-case zip extensions.


Rgds,

[mbocos]

Try with Firefox, me open it with public access (before login).

[mbocos]

With uppercase extension.

[cnb]

Was the iLO upgraded to 1.80 before or after the P410i?

Did you use the Firmware Maintenance CD to do the upgrades?

Rgds,

[mbocos]

ILO has already the requiered version from factory, so I update Smart Array after ILO.

[cnb]

Good, so we can assume that the SAS backplanes are at the required 1.16 minimum version? If you used the Latest Firmware CD to do the update then everything should be able to use 6G.

Does the DG0146FARVU drive at Physical Drive 1I:1:2 show the correct negotiated link speed of 6GB?

Rgds,