HPE Community
ProLiant Servers (ML,DL,SL)
1753674 Members
5161 Online
108799 Solutions
New Discussion

6i smart array controller locked in my Proliant DL 380 server

 
Yusuf Abdulrahman
Occasional Contributor

‎03-01-2007 03:58 AM

‎03-01-2007 03:58 AM

6i smart array controller locked in my Proliant DL 380 server

After testing another Motherboard in my Proliant DL 380 Gen 4 server, it started displaying a "6i smart array controller locked until hardware issues are resolved" when I returned the original motherboard during boot-up, and it will automatically reboot after 4 seconds since it cannot boot from the HDD. Please I will appreciate a fast response to enable me resolve this issue.
0 Kudos
Reply
1 REPLY 1
MSECO_1
Trusted Contributor

‎03-02-2007 02:05 AM

‎03-02-2007 02:05 AM

Re: 6i smart array controller locked in my Proliant DL 380 server

Try this procedure:
Install the new system board
Pull out all hard drives
Inside BIOS (RBSU):
Advanced Options
Erase Non-volatile Memory

Warning: Clearing NVRAM will reset all configuration settings to their default values.

Turn off your server
Insert all hard drives again and boot.
Keep learning!!!
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.