8-Bay SFF PCB Power Connector

[Topsie85]

Hello

I'm after a bit of advice, i've been trawling the internet for hours with no success. I've recently purchased an 8-bay SFF drive cage originally meant for a DL370 G5, on the rear of the cage is a PCB with a 10 pin power connector. I've been looking high and low for a breakdown of the pins for the connector so I can make up a power connector, i'm guessing it's going to need +12v, +5v ,+3.3v & COM but i've no idea which pin is which?

Can anybody help?

Regards

Nick

[Suman_1978]

Hi,

The part number on the attached pic is meant for ML370 G4 server.

http://partsurfer.hp.com/Search.aspx?SearchText=412736-001

I could not find more information on the pin but if you check the power supply backplane of ML370 G4 server, you may find the answer for power connector.

ML370 G4 power supply backplane part# 412735-001

Thank You!
I am a HP employee
__________________________________________
Was the post useful? Click on the white KUDOS! Thumb below to say Thank You!

Useful Links for ProLiant Servers

Self Solve Options for ProLiant Servers

[Topsie85]

Thanks for your help, very much appreciated! I don't have a G4 (or G5 for that matter!) Server to hand, perhaps someone has one they are currently carrying out maintenance on that can help?

Regards

Nick