878783-B21 - HPE Universal SATA HHHL 3yr Wty M.2 Kit

[andy_msc]

Hi Community,

I haven't found anything on HPE Website or in QuickSpec which slot should be used to install the HPE Universal SATA HHHL 3yr Wty M.2 Kit (878783-B21) in a standard HPE ProLiant DL380 Gen10 Server.

I couldn't find specifiation in quick specs if the card is PCIe 3.0 X16 or PCIe 3.0 X8.

I would install it in slot 1, except if it is x16,. Then I would install in slot 2.

Any insights?
Thanks.

[Suman_1978 · Accepted solution]

Hi,

Please refer to this QuickSpecs, https://h20195.www2.hpe.com/v2/getpdf.aspx/a00001288enw.pdf
878783-B21 enablement Kit is an Add-In-Card, for installation inside of the server, that can be configured to be either Single or Dual with choice of any SATA 2280 M.2 in the HPE M.2 portfolio. 

According to HPE ProLiant DL380 Gen10 Server QuickSpecs, https://h20195.www2.hpe.com/v2/getpdf.aspx/a00008180ENUS.pdf

According to http://partsurfer.hpe.com/Search.aspx?SearchText=878783-B21
It should b PCIe3 x8

---

Thank You!
I am an HPE Employee

Was the post useful? Click on the white KUDOS! Thumb below.  Kudos is a way of saying thank you to a post.
Useful Links for ProLiant Servers

[SanjeevGoyal]

Hi

Please follow the: https://h20195.www2.hpe.com/v2/getpdf.aspx/a00001288enw.pdf

NOTE: *878783-B21 enablement Kit is an Add-In-Card, for installation inside of the server, that can be configured to be either

Single or Dual with choice of any SATA 2280 M.2 in the HPE M.2 portfolio. See SATA M.2s in Recommended and Extended.

For more clarifications follow Quick space of  DL380 Gen10 Server QuickSpecs, https://h20195.www2.hpe.com/v2/getpdf.aspx/a00008180ENUS.pdf

HPE ProLiant DL380 Gen10 Server - Removing and Replacing an M.2 SSD

https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00026952en_us&docLocale=en_US

 For more clarification down load HPE ProLiant DL388 Gen10 Server User

 Regards,

Sanjeev Goyal