ProLiant Servers (ML,DL,SL)
1752802 Members
5306 Online
108789 Solutions
New Discussion юеВ

Re: 8gig in Proliant 110 G5

 
Essa Moshiri
New Member

8gig in Proliant 110 G5

Hi All,
I wonder if anyone here has had a issue with their Proliant 110 G5.

I have added 4Gig memory without any problem. Once i ad any other memory module, it if it is 1, 2 gig or if it is 4x2 gig i get a error and computer does not start.

It start with a long "Beep" followed by 3 shorter beeps and than short paus and than another 3 beeps finaly one last long beep.

I know it has to do with memory but i don't understand as per HP spec it should support 8Gig ram. I have the latest BIOS as well.

I have been testing diffrent memory modules and so on. Nothing seems to be helping.
3 REPLIES 3
marcus1234
Honored Contributor

Re: 8gig in Proliant 110 G5

hmm Essa you can use four of these to make 8gigs max

GB Unbuffered PC2-6400 ECC DIMM (1 x 2 GB) 450260-B21

http://h18000.www1.hp.com/products/quickspecs/12867_na/12867_na.HTML#Memory

make sure it is hp branded,best if it is same brand too , and ensure you have latest rom ,
swap dims around does a certain dimm light up yellow on the sys board,if it sa certain dimm it a bad one if its the slot then its the board , if a mixture then likely it is not real hp dimm.


This is how we thank each other in the forum

http://forums11.itrc.hp.com/service/forums/helptips.do?#33

Enjoy:)

Essa Moshiri
New Member

Re: 8gig in Proliant 110 G5

Hi Mark,
Great and speedy response. I am wondering if i have a problem on the board.

Here is some fact. I have swapped around with memory back and forth and none does help 4 gig no problem but anything above 4 or more than 2 slots taken it starts to complain.


You said "swap dims around does a certain dimm light up yellow on the sys" what light do you refeer to?

I have even tried to put in the old 1 gig module but as soon as i add a 2 other modules than it stops working.

The latest memory i bought is PNY DDR2 800Mhz PC5400 None ECC.But they work fine if i just put them in. In combination with my other memory they will not work.


All the best
--
Essa
marcus1234
Honored Contributor

Re: 8gig in Proliant 110 G5

ensure all memory is hp branded , and has numbers that match from the link i sent

install memory according to that quickspec document...
in the link above, often memory is sold as HP compatible but not branded and does cause such issues


This is how we thank each other in the forum

http://forums11.itrc.hp.com/service/forums/helptips.do?#33

Enjoy:)