AC Power on loss - ML330 G3

[Alex Del]

Hi,

Sorry for my ba english, I'm French.

My question:

How to activate the AC power on loss on a ML330 G3 server. I search this option in the bios but i did not fount it.

Could you help me please?

Thanks in advance.

Alex

[Prashant (I am Back)]

What i understand is. When there is power loss you want the server to boot up. Is that so. If yes, there is no configurable option like that.

Or else please explain your concern again.

Prashant S.

[Oleg Koroz]

Majority of HP/COMPAQ server has that future embedded in the BIOS by default; along there is no option in the actual BIOS to change anything.
What happened if you pull cable from wall outlet and after plug back - would server come up.

[Alex Del]

It's exactly that.
We have one of this ML330 and when there is a power loss, the server boot up alone.
We have sent two servers ML330 to a customer in Africa and when they have a power loss, their equipment don't boot up automaticaly when the power be back.

I search in the bios but i did not found any option about that.

Any idea?

[Oleg Koroz]

is any UPS used or wall outlet Voltage rates are standart, V, A, Hz

http://h18004.www1.hp.com/products/quickspecs/11614_div/11614_div.html

[Prashant (I am Back)]

There is no option as such to configure it.
I have come across with same senario no of time.

Prashant S.

[Alex Del]

No UPS;
No wall outlet,

So no solution, thanks a lot.

Perhaps in a more recently bios version.

[Prashant (I am Back)]

Hi,

Where no so option avaible on any of the server even in new one also. I think there will not be any update on the same option.

Prashant S.