ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ACU/ADU on Proliant ML110 G5 (Win2003 STD SP2)

 
AlbertMG
Occasional Visitor

ACU/ADU on Proliant ML110 G5 (Win2003 STD SP2)

Hello,

I have a Proliant ML110 G5 and I recently formatted it because of the enterprise needs. The only available license was a Windows 2003 Server STD SP2, so I installed it.

It has 4 HD (1Tb each) in RAID 1+0 and 2Gb RAM. Windows installed perfectly, it detected only one disk (the volume I created), so I only needed to install some remaining drivers when installation finished, but not disk one.

Now I need to know the array status, because the server is working as a NAS, but ACU/ADU nor any application detects the physical disks, only the array volume.

I'm desesperated, I've been "playing" with this for a week and I can't found any solution.

Thanks for your attention,
Albert
1 REPLY
juan quesada
Respected Contributor

Re: ACU/ADU on Proliant ML110 G5 (Win2003 STD SP2)

acu/adu will only work on HP smart array controllers, which controller do you have?

JQ