ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ACU Wont Detect my controller

TRSands01
Occasional Visitor

ACU Wont Detect my controller

I am preparing to upgrade my Proliant ML 350 by hot-swapping out the drives for larger ones then reallocating drive partitions. I downloaded ACU version 8.0.14.0 from HP . However when I run it on my server it says no supported controllers detected. How can I findout what is my controller without having to bring the system down? Also, I would like to do the drive swaps 'online' without bringing down the system. How can I monitor the progress of the rebuild?

2 REPLIES
Michal Kapalka (mikap)
Honored Contributor

Re: ACU Wont Detect my controller

hi,

the ACU is to old use the latest version, i hade the same situation 3 months ago.

the version 8.0.14 is from this site :

http://h18000.www1.hp.com/products/servers/proliantstorage/software-management/acumatrix/index.html

==> Download software ==> Windows GUI ACU ==>

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=329290&prodSeriesId=374789&prodNameId=266589&swEnvOID=1005&swLang=8&mode=2&taskId=135&swItem=MTX-0d16000b9f7d454eb8f32ef1fe

but this version is obsolete, you need to download it from this location :

HP ProLiant Array Configuration Utility for Windows 8.40.4.0 (B) (15 Apr 2010)

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=329290&prodSeriesId=1157687&prodNameId=1157689&swEnvOID=1005&swLang=8&mode=2&taskId=135&swItem=MTX-8deb8ec00ca740d4b69c47b32d

assign points if the answer solved your problem.

mikap

TRSands01
Occasional Visitor

Re: ACU Wont Detect my controller

I tried your suggestion with the same results. Upon further checking I found that I have an Adaptec I20 SCSI RaiD controller. So I guess Im in the wrong forum