ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ACU did not detect any supported Controllers in your system

Lenny_16
Occasional Contributor

ACU did not detect any supported Controllers in your system

Date: 06.Dec.2007
Server : DL380/ G2
3x36BG Smart Array 5i Controller

1. after install the november patch/ my server was force to reboot. sinc then i get a message non/ system disk etc.
2. since this server was in a test enviroment; i use the smart start 7.5 ver. to verify
3. i. Boot controls disk size 0MB
ii. ACU did not detect any supported Controllers in your system

Please advice what should I do?
Lenny
3 REPLIES
Víctor Cespón
Honored Contributor

Re: ACU did not detect any supported Controllers in your system

What patch did you install?
When the system boots, can you see the Smart Array message in bright white and red letters?
Lenny_16
Occasional Contributor

Re: ACU did not detect any supported Controllers in your system

when i power on...
1. cup 1 & 2 detected
2. ROM Redundancy Detected
3. Initializing Intel(R) boot agent version
4.0.17/ PXE 2.0 Build 083 etc.
Press Ctril +S for setup menu
4. System currently configured for windows
2000
Press F9 / works
Press F10 / not working/ no system ...
Press F12 / .... media failed

hope this helps...
Víctor Cespón
Honored Contributor

Re: ACU did not detect any supported Controllers in your system

Smart Array dead.
In this model it is in a mini-PCI slot on the motherboard. Try to reseat it and clear CMOS.