ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ACU did not detect any supported in your system

Max.LAM
Occasional Visitor

ACU did not detect any supported in your system

Hi,

My server is an ML110 bought recently.
I use EasyCD Setup. My RAID 1 is constructed. I have Two Disk 250 GB to 1,5 Mb/s. In BIOS all are correct and detected. All seems correct but easyCD setup tell me that. So i can't install my OS. I cleared BIOS, I reconfigured, i recreated RAID but nothing. Always tihs message.

PLEASE HELP !

Thanks.
4 REPLIES
KarloChacon
Honored Contributor

Re: ACU did not detect any supported in your system

hi

how come?
what is the exactly error you are getting?

bye
Didn't your momma teach you to say thanks!
Max.LAM
Occasional Visitor

Re: ACU did not detect any supported in your system

ERROR ->

Boot Controller : "Intel 82801 SATA RAID Controller" ("" writen in red)
Boot Controller Disk Size : "0 MB" ("" writen in red)

and

The primary controller configured in your system is not supported by this version of HP proliant Easy Set-Up CD.

PROBLEM ->

The good controller driver is on this CD... When i call it, it exist. The CD is good for ML110 server. But, even if the bios see my disks and my raid, the installer don't see them. SO it writes 0 MB.

I think to have tried all. I need help.
KarloChacon
Honored Contributor

Re: ACU did not detect any supported in your system

yeah

Easy Setup CD does not support Embedded SATA controller you must install Windows manually
I mean windows and USB floppy to load the drivers for your controller or using nlite which is the best way to go

nlite

nLite is a tool for pre-installation Windows configuration and component removal at your choice. Optional bootable image ready for burning on media or testing in virtual machines.

http://www.nliteos.com/nlite.html

drivers
I don't you OS but here is the link to get it

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=3577715&taskId=135&prodTypeId=15351&prodSeriesId=3577708&submit.y=0&submit.x=0〈=en&cc=us

it is called
HP Embedded G5 SATA RAID Controller Driver
the one you need to use

bye
Didn't your momma teach you to say thanks!
Max.LAM
Occasional Visitor

Re: ACU did not detect any supported in your system

I go to try... i'll say you if it runs.